Inateck NVMe Enclosure for M.2 NVMe and SATA SSDs, USB 3.2 Gen 2 Type C,FE2025 Hardware Interface: USB 3.2 Gen 2 Brand: Inateck Color: Space Gray Item Dimensions LxWxH: 4.19 x 1.5 x 0.52 inches Hardware Platform: Windows About this item 10 Gbps Transmission Speed: Supports up to 10 Gbps transmission rate, with read and write speeds up to 950Mb/s. You can finish transferring ultra large files within seconds. Wide Compatibility: The FE2025 is compatible with M.2 NVMe and SATA SSDs. It can run on Windows 7/8/10, Mac OS and Linux. Applicable to M Key and B M Key SSDs. Please note that B Key SSDs are not supported. Kindly check the port type of your hard drive before purchasing the enclosure. Three Dimensions Supported: Comes with two fixators that can fix M.2 SSDs with different dimensions. The supported SSD lengths include 2242, 2260 and 2280. Tool-free Installation: The hard drive enclosure supports tool-free installation, which is very convenient to use. Being lightweight and compact, the FE2025 is very easy to carry around. Tool-free Installation: The hard drive enclosure supports tool-free installation, which is very convenient to use. How to Install 1. Press down the lock, and then slightly pull out the inner tray of the hard drive enclosure. 2. Select a proper slot according to the length of the hard drive, and slide the fixator in. The supported hard drive dimensions include 2242, 2260, and 2280 (No fixator required for hard drive 2280). 3. Lay the hard drive into the inner tray of the enclosure and have it connected to the motherboard interface. Then, fix the hard drive with the fixator. Finally, push the inner tray into the hard drive enclosure to complete the installation. Package Content: 1 x Inateck FE2025 2 x Fixators 1 x USB Type-C to USB Type-C Cable 1 x USB Type-C to USB Type-A Cable 1 x Silicone Heat-dissipation Pad 1 x Instruction Manual 23A1012-05