ELM327 USB Plsatic V1.5 Auto Car Diagnostic Cable
Description:
ELM 327 is the latest PC-based scan tool.It supports all OBD-II protocols and is dispatched with a number of compatible programs. The processor is an ELM 327. The output protocol (connection to laptop) is USB cable.It is easy to use and very useful to diagnose cars.
OBD-II Software for ELM 327 is a free program that allows you to use your PC and a hardware interface to get the information from your cars computer.
ELM327 USB Plastic Connect PC:
Hardware V1.5,Software V2.1
Supports All OBDII protocols
Computer System: Windows XP/Win7 32bits,close anti-virus program to install software.
Supports 12V gasoline cars,NO supports diesel&truck.
Supports All OBDII Protocols:(please check your car prtocols if supported or not )
SAE J1850 PWM (41.6 kbaud)
SAE J1850 VPW (10.4 kbaud)
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
OBD-II Protocols of ELM 327 USB Plastic:
- ISO15765-4 (CAN)
- ISO14230-4 (KWP2000)
- ISO9141-2
- J1850 VPW
- J1850 PWM
Specifications:
Chip: PL-2303HX
Output protocol: RS232
Baud rate: 9600 or 38400
Indicator LEDs: OBD Tx/Rx, RS232 Tx/Rx, Power
Operating voltage: 12V, internal protection from short circuits/overvoltage
Nominal idle current: 45 mA
Install of ELM 327 USB Plastic:
Simply extract the files into a folder on your computer's hard drive, and you're ready to go.-
Touninstall the program, simply delete the entire contents of the folder where the program resides.
The software supports two platforms - DOS and Windows.
Vehicle Coverage of ELM327 USB Plastic:
Works on OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)
For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
Function Operations:
1. Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2. Clear trouble codes and turn off the MIL ("Check Engine" light)
3. Display current sensor data, including:
4. Engine RPM
5. Calculated Load Value
6. Coolant Temperature
7. Fuel System Status
8. Vehicle Speed
9. Short Term Fuel Trim
10. Long Term Fuel Trim
11. Intake Manifold Pressure
12. Timing Advance
13. Intake Air Temperature
14. Air Flow Rate
15. Absolute Throttle Position
16. Oxygen sensor voltages/associated short term fuel trims
17. Fuel System status
18. Fuel Pressure
AND Many others...
Package List:
1 x elm327 USB interface
1 x CD software
Kindly Remind:If CD broken in shipping way or unreadable,please feel free to contact us ,we will send u link to download,sorry for that.
This ELM327 works ONLY for Gasoline cars,it does not supports Diesel car and Truck.
It supports multi-brand gasoline cars,but we can't test it on all cars ,also each car brand has many series,so we can not make sure if this device works your car or not .
Your vehicle may not support all engine metrics. The availability of engine metrics varies depending on the vehicle make and model.
We suggest you can buy one to try and test . As this is cheap elm327,but it has powerful function for your car !
(description exceeds maximum possible length)