Brand NEW!  

Including 90 Days USA Factory Warranty.

Dayton Audio's Designer Series DS215-8 8" woofer combines smooth response, excellent bass performance, and a stylish visual presentation.

Key Features 
Cosmetic frame with low profile lip, designed for front mounting—no countersinking required! Coated paper cone, half roll rubber surround for durability and accurate reproduction Optimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinet Smooth frequency response and linear roll-off simplify filter design, guaranteeing good results with off-the-shelf crossovers Vented pole piece for minimized power compression and maximized reliability Generous Xmax capability encourages use of moderate bass boost to tailor the response Retains the same "family look" as the popular Dayton Audio DVC Series subwoofers and passive radiators  
The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax.  
These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.  

Specifications
Nominal Diameter    8"
Bolt Circle Diameter    8.11
Moving Mass Of Diaphragm (Mmd)    29.7
Power Handling (RMS)    80 Watts
Power Handling (MAX)    160 Watts
Impedance    8Ω
Frequency Response    35 to 4,000Hz
Sensitivity    89.9dB 2.83V/1m
Voice Coil Diameter    1.52"

Thiele-Small Parameters
Resonant Frequency (Fs)    34.3Hz
DC Resistance (Re)    5.8Ω
Voice Coil Inductance (Le)    1.25mH
Mechanical Q (Qms)    1.75
Electromagnetic Q (Qes)    0.38
Total Q (Qts)    0.31
Compliance Equivalent Volume (Vas)    1.52ft³
Mechanical Compliance of Suspension (Cms)    0.72mm/N
BL Product (BL)    9.89T·m
Maximum Linear Excursion (Xmax)    5.5mm
Surface Area of Cone (Sd)    211.2cm²

Materials of Construction
Cone Material    Coated Paper
Surround Material    Rubber
Voice Coil Wire Material    Copper
Voice Coil Former    Aluminum
Basket / Frame Material    Steel
Magnet Material    Ferrite

Mounting Information
Overall Outside Diameter    8.5"
Baffle Cutout Diameter    7.09"
Depth    3.76"
# Mounting Holes    5
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
Sealed Volume    0.28ft³
Sealed F3    87Hz
Vented Volume    0.6ft³
Vented F3    52Hz

- All international buyers are responsible for all tax, duties and/or customs fees.